How To Change The Light Bulb In A Flush Ceiling Light

Everyone agrees that irresolute a lite bulb is i of the simplest things to practice.

or perchance not always! In fact, if you search on the web you will observe a number of incidents where someone was killed while irresolute a light bulb. And so don't have this task lightly or you lot will light up!

My video here pretty much sums information technology upward. There are many things that can become incorrect when you modify a calorie-free bulb, worst of them being sticking your finger in the low-cal fixture to pick something up while it is still live.

The danger of getting shocked is non simply dying by electricity, merely also in some cases when one has to climb up somewhere insecure to change the seedling, they tin can autumn and get hurt. And then:

First of all make sure the fixture is not live. Fifty-fifty if you flip the switch off, information technology doesn't necessarily mean that the fixture is not live. When the house wiring is washed right, the switch disconnects the live wire. Simply in some poor workmanship cases, they disconnect the neutral line to the fixture which ways that the live power is notwithstanding present and the electric path can shut through ones trunk to the footing where he or she is standing on. So if you have a tool to check for live electricity, employ it to make sure the fixture is safe, or otherwise just open the billow in your habitation'due south fuse box to close it down. In most cases the breakers are wired correctly!
The next effect that usually hurts me is when I touch the bulb when it is still too hot. Well, just be cautious and await for it to cool down. It is not a life hazard, but it's pretty annoying.
Of course there is always the possibility of the screw function (or base of operations) getting stuck in the fixture. This would happen mostly to the bulbs used outside the house or in more than humid rooms where the humidity can rust the screw base and brand information technology stick within the fixture. Now in that location are ii things that can happen: the bulb breaks off the base, or the more than dangerous one is that it doesn't come off easily and due to too much pressure level, it breaks in ones hand causing injury. The bulb is a very thin glass and will break easily. So if yous have to put excessive pressure on a seedling, and so apply a thick glove to protect your hand.

Of form, don't try to extract something inside the fixture with your manus, specially if you are non sure if it is live or not. The adventure is also that something abrupt in in that location may cut you. Utilise a tool.
Every fixture has some maximum power rating written on information technology nowadays. Don't use a bulb that exceeds that rating, especially with a great margin. The hazard is that the under rated fixture and wires can get as well hot due to extra power and tin cook and crusade a short or fire.
I don't think anyone volition ever practise this, but don't have bulbs from a state to another with a different firm voltage. Like I mentioned, a 100W bulb rated for a 110V country will swallow 400W in a 220V country and will blow upwards. You may say, why 400W, the voltage is but double. But retrieve that assuming a fixed resistance for the seedling, a double voltage will besides hateful a double current, and power is voltage times electric current. For the same reason, a 100W from a 220V country will but be like 25W in a 110V country. In 110V countries, there are ordinarily 220V line available for powering loftier power appliances like the cooking range or the washer/dryer. Don't get crazy and utilize those to power a bulb.
1 more thing is that, in general, when working on a loftier ability electric object, try to insulate yourself from ground so that if there is stray electricity somewhere, your body won't close the path and cause a shock.

Bask your DIY job safely!